Batteries
-
Batteries, Batteries | Chargers and Accessories
GNB XT60 LiPo Battery 6S 22.2V 1550mAh 120C Digital High Performance 6-Cell Unit for Power Tools and RC Vehicles
-22%
Batteries, Batteries | Chargers and AccessoriesGNB XT60 LiPo Battery 6S 22.2V 1550mAh 120C Digital High Performance 6-Cell Unit for Power Tools and RC Vehicles
Industry-specific attributes
useToys, BOATS, electric vehicles, RC DRONE CAR, RCtypeLi-IonOther attributes
place of originTianjin, ChinaCapacity1550mAhVoltage22.2VCells Configuration6S1PDischarge Rate120CCharge Rate1C to 5CDischarge ConnectorXT60Packaging and delivery
Selling Units:Single itemSingle package size:15X15X20 cmSingle gross weight:1.000 kgSKU: n/a -
Batteries, Batteries | Chargers and Accessories
MICRO-STEPPING STEPPER MOTOR DRIVE 20-80V 7.2AMP
-50%
Batteries, Batteries | Chargers and AccessoriesMICRO-STEPPING STEPPER MOTOR DRIVE 20-80V 7.2AMP
Peak Current SW1 SW2 SW3 2.40A ON ON ON 3.08A OFF ON ON 3.77A ON OFF ON 4.45A OFF OFF ON 5.14A ON ON OFF 5.83A OFF ON OFF 6.52A ON OFF OFF 7.20A OFF OFF OFF Standstill Current Setting :SW4 is used for standstill current setting. OFF mean s that the standstill current is half of the dynamic current ; and ON mean s that standstill current is the same as the selected dynamic current. Usually the SW4 is set to OFF, in order to reduce the heat of the motor and driver.Switch Selection Table For Step Resolution setting:Steps/Rev SW5 SW6 SW7 SW8 400 OFF ON ON ON 800 ON OFF ON ON 1600 OFF OFF ON ON 3200 ON ON OFF ON 6400 OFF ON OFF ON 12800 ON OFF OFF ON 25600 OFF OFF OFF ON 1000 ON ON ON OFF 2000 OFF ON ON OFF 4000 ON OFF ON OFF 5000 OFF OFF ON OFF 8000 ON ON OFF OFF 10000 OFF ON OFF OFF 20000 ON OFF OFF OFF 25000 OFF OFF OFF OFF Package Includes:- 1 x Rhino Micro-Stepping Stepper Motor Drive 20-80V 7.2Amp
SKU: n/a -
Batteries, Batteries | Chargers and Accessories, Motors | Drivers | Pumps | Actuators
Nema34 Planetary GEARED STEPPER MOTOR 500 KGCM
-42%
Batteries, Batteries | Chargers and Accessories, Motors | Drivers | Pumps | ActuatorsNema34 Planetary GEARED STEPPER MOTOR 500 KGCM
This is Nema34 Planetary Reducer 86mm stepper motor. The Input shaft is 14mm. Planetary reducer gearbox with a 1:10 gear ratio at rated torque of 500Kg.
Motor Specifications:
- Step Angle : 1.8 Degree
- Configuration: 4 wire bipolar stepper motor
- Phase current : 5Amp
- Resistance/phase: 0.76ohm
- Inductance/Phase : 8.5mH
- Rotor inertia: 2700 gcm2
- Shaft Dia : 12.7mm
- Shaft Length : 32mm
- Total Weight (Motor with Gearbox): 5.8 Kilograms
Gearbox Specifications:
- Category : Planetary Gear Reducer
- Flange: 86mm Nema34
- Efficiency : 96%
- Speed Ratio : 1:10
- Noise : <45 DB
- Backlash : <15 Arcmin
- Gearbox height : 53mm
- Output Shaft Dia : 14mm (key shaft)
SKU: n/a
