Brushed / Brushless DC motor Driver
Showing 25–48 of 55 results
-
Motors | Drivers | Pumps | Actuators
Dual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
-32%
Motors | Drivers | Pumps | ActuatorsDual Monster Moto Shield VNH3ASP30 DC Motor Driver 2x14A (Peak 30A)
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Enhanced Cytron 40Amp DC Motor Driver (Peak 80amp) MDS40B
-
Bi-directional control for a single brushed DC motor.
-
Support motor from 10V to 45V.
-
Maximum current up to 80A peak, reduce to 40A gradually according to temperature.
-
16 KHz switching frequency for quiet operation.
-
NO Reverse polarity protection.
-
Protection of overvoltage.
SKU: n/a -
-
-
-
Motors | Drivers | Pumps | Actuators
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
-47%
Motors | Drivers | Pumps | ActuatorsL293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
- Motor Power Range: 4.5V ~ 36V
- Control supply range: 4.5V ~ 9V
- Logical operating current Iss: ≤60mA
- Driving part of the work current Io: ≤1.2A
- Maximum power dissipation: 4W (T = 90 ℃)
- Operating temperature : -25 ℃ ~ + 125 ℃
- Drive Type: Dual high-power H-bridge driver
SKU: n/a -
Motors | Drivers | Pumps | Actuators
MD13S 13Amp DC Motor Driver – GROVE Compatible
-
Support motor voltage ranges from 6V to 30V
-
Maximum current up to 13A continuous and 30A peak (10 seconds).
-
GROVE compatible
-
3.3V and 5V logic level input.
-
SMD compatible
- Peak Current (A): 30 (10 seconds)
- Continuous Current (A): 1
- No. of Channels: 1
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
Monster Moto Shield VNH3SP30 Motor Driver 14A (Peak 30A)
- Voltage Max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 34 mΩ
- Maximum PWM frequency: 10 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Motor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
-32%
Motors | Drivers | Pumps | ActuatorsMotor Driver TB6612FNG Module Performance Ultra Small Volume 3 PI Matching Performance Ultra L298N
- CW/CCW/short break/stop motor control modes
- Built-in thermal shutdown circuit and a low voltage detecting circuit
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Operating Voltage(VDC): 15
- Peak Current (A): 3.2
- Continuous Current (A): 1.2
- No. of Channels: 1
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8256E Single Brushed DC Motor Driver Carrier
- built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature
- simple two-pin speed direction interface
- Under-voltage lockout and protection against over-current and over-temperature
- Simple interface requires only two I/O lines (one for direction and another for speed)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8835 Dual Motor Driver Carrier
- Under-voltage lockout on the logic supply and protection against over-current and over-temperature
- Reverse-voltage protection on the motor supply
- Compact size (0.7″×0.4″) with the form factor of a 14-pin DIP package
- Inputs are 3V- and 5V-compatible
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Pololu DRV8838 Single Brushed DC Motor Driver Carrier
- Reverse-voltage protection on the motor supply
- H-bridge motor driver: can drive one DC motor
- Motor supply voltage: 0Â V to 11Â V
- Logic supply voltage: 1.8Â V to 7Â V
- easy to use with standard solderless breadboards
SKU: n/a -
-
-
Motors | Drivers | Pumps | Actuators
Pololu MAX14870 Single Brushed DC Motor Driver Carrier
- No separate logic supply needed; inputs are 3V- and 5V-compatible
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Carrier board adds reverse-voltage protection
- Compact size (0.6″×0.5″)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Sabertooth Dual 12A Motor Driver
- 12A continuous, 25A peak per channel Up to 24V in
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Peak Current (A): 25A
- Continuous Current (A): 12
- Operating Voltage(VDC): 18 to 24V
- No. of Channels: 2
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
Sabertooth Dual 25A Motor Driver
- 25A continuous, 50A peak per channel
6-30V nominal, 33.6V absolute maximum - Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
SKU: n/a - 25A continuous, 50A peak per channel
-
Motors | Drivers | Pumps | Actuators
Sabertooth Dual 32A Motor Driver
- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
SKU: n/a -
Motors | Drivers | Pumps | Actuators
Sabertooth Dual 5A Motor Driver for R/C
- Operating Voltage(VDC): 6-18
- Peak Current (A): 10
- Continuous Current (A): 5
- No. of Channels: 2
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
SKU: n/a
