Stepper Motor Drivers
Showing 25–38 of 38 results
-
-
Motors | Drivers | Pumps | Actuators
TB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
-33%
Motors | Drivers | Pumps | ActuatorsTB6560 Driver Board 3A CNC Router Single 1 Axis Controller Stepper Motor
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- With the large heat sink to ensure good heat dissipation
- 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
-35%
Motors | Drivers | Pumps | ActuatorsTB6600 0.2-5A CNC Controller Stepper Motor Driver Single Axes Two Phase Hybrid Stepper Motor for CNC
- Input Current: 1~5A
- Supply Voltage: 12 to 48VDC
- Output Current: 0.2~5.0A
- Power (MAX): 160W
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
-40%
Motors | Drivers | Pumps | ActuatorsTB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- Input Current: 0~5A
- Output Current: 0.5~4.0A
- Control Signal: 3.3~24V
- Power (MAX): 160W
- Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
- Temperature: -10～45℃
- H bridge bipolar constant current drive.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TB6600 Stepper Motor Driver Controller 8~50V 4.5A
- Supply Voltage: 8V – 50V DC (36V recommended).
- Output current: 0.3A – 4.5A (peak value of 5A).
- Micro Step: 1, 2, 8, 16.
- Maximum PWM frequency:Â 200kHz.
- Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
- Operating temperature: -10 to + 45 ° С.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
-24%
Motors | Drivers | Pumps | ActuatorsTL-Smoother Eight Chip Module DFORCE Vibration Pattern Filter with Cable
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors,
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer
- I3 and UM models can also be used, and different machines will have different clipping effects.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2100 Stepper Motor Driver, Module
- This driver has 200 steps per revolution in full step (1.8 degrees per step).
- Allowable continuous current per phase: 1.25A (RMS) or 1.77A (max)
- The maximum current in the short term for each phase: 2.5A
- Motor voltage: 5.5 to 46 V
- StealthChop mode to reduce noise
- SpreadCycle mode to increase torque
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
TMC2208 Stepper Motor Driver Module
- Voltage range: 3.3-5V
- Maximum current: 1.2A per phase (continuous, with cooling), 2A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor Driver Module with Heatsink
- Operating Voltage: 4.5V to 28V DC
- Input Signal Logic Voltage: 3.3V to 5V DC
- Maximum Peak Current: 2A per phase (use with Heatsink and Fan only)
- Maximum Continuous Current: 2A
- Compatibility: 3V3 and 5V microcontrollers
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TMC2209 Stepper Motor DriverF
- Maximum current: 2A per phase (continuous, with cooling), 2.8A peak per phase
- Works with 3.3V and 5V signals
- Comes with heatsink for better cooling
- Has StealthChop technology for quieter stepper motors
- Has SpreadCycl technology for smoother movements
SKU: n/a -
-
Motors | Drivers | Pumps | Actuators
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
SKU: n/a
