ESC

1. Item: D-SHOT Bullet ESC 12A
2. Continuous Current:12A
3. Burst current:15A
4. No of  cells:2-4S
5. Weight(g) without wires:2.4G

1. Model: Nano 12A ESC.
2. Input voltage: 3-4S Lipo.
3. BEC: NO
4. Continue Current: 12A.
5. Burst current: 15A.
6. Firmware: BLHeli_32.

1. Battery: 6-25.2V (2-6S Lipo).
2. Current Rating: 30amp / 35amp burst.
3. MCU: SILABS EFM8BB21F16, MCU running at 48MHz.
4. Dedicated driver chip.
5. OPTO ESC.

1 Output: Continuous 80A, Burst 100A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)

1 Output: Continuous 60A, Burst 80A up to 10 seconds.
2 Input Voltage: 3-6S Lipo, 5-18 cells NiMH.
3 BEC: 5A / 5V Switch mode BEC.
4 Refresh rate of the throttle signal: 50Hz to 432Hz.
5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM.
(BLM = BrushLess Motor)
6 Size: 77mm*35mm*14mm.
7 Weight: 63g

1. Direct plug design,
2. Works with most USB port and USB extension cable
3.  Low power consumption design
4. Onboard 2×3 Pin AVR ISP port
5.  3pin servo connector can be used as servo or C2 connection
6. Supports SIMONK and BLHELI ESC, KKflashtool compatible
7. KKflashtool and RapidFlash compatible