- Model: CCM6DS
- High-Quality Construction
- Input Voltage: 12 to 50VDC
- Output Current: 30A (max)
Motors | Drivers | Pumps | Actuators
1500W DC 12-50V 30A Electric PWM Speed Control Regulator
- Model: CCM6DS
- High-Quality Construction
- Input Voltage: 12 to 50VDC
- Output Current: 30A (max)
₹976.00 ₹1,476.00
Related products
-
Motors | Drivers | Pumps | Actuators
12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
-38%
Motors | Drivers | Pumps | Actuators12V DC 1/2″ Normally Closed Electric Solenoid Water Air Valve Switch
12V DC Solenoid Water Air Valve Switch (Normally Closed) – 1/2″ controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project. There are two ½” (Nominal NPT) outlets. Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
Note: While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value)
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
-38%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 100RPM Dual Shaft BO Motor – Yellow – Pack Of 8
- The 100 RPM Dual Shaft BO Motor is a straight motor which gives good torque and RPM at lower operating voltages. It is a geared DC Motor. It is an alternative to metal gear DC motors.
- Low density | Lightweight | Low inertia | Capability to absorb shock and vibration as a result of elastic compliance | Ability to operate with minimum or no lubrication | Inherent lubricity | Relatively low coefficient of friction
- Shaft length : 7 mm Motor Design : L-Shaped Shaft Diameter : 5.5 mm Size : 55 x 48 x 23 mm
- The BO motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install and ideally suited for use in a mobile robot car.
- Operating Voltage : 3 to 12V Current (without loading) : 40-180mA RPM : 100 Output Torque : 0.8 kg cm
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA 5 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
-50%
Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 5 Pcs MG90S Mini Digital Servo Motor With Metal Gears-180° Rotation-For RC Airplanes,Helicopters
- Tiny and lightweight with high output power, this tiny MG90S servo is perfect for RC Airplane, Helicopter, Quadcopter or Robot.
- This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware.
- Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller.
- You can use any servo code, hardware or library to control these servos. Suit for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places.
- 5 Pieces MG90s
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
-30%
Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 1pcs 12V 5 Kg-cm 200 RPM 6mm Shaft 5 Kg-cm Torque Geared DC Motor with 12V – 40V 10A PWM DC Motor Variable Speed Controlle
- DC Motor – Voltage: 6V to 12V; RPM : 200; Torque Range: 5 Kg-cm
- Input supply voltage: 10V – 40VDC ; Max. Current: 10A
- 1. Connect your DC motor (or DC load) to the motor terminals as indicated. 2. Connect a voltage of 10V-36V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. 3. You can now control the speed of the motor through potentiometer.
- Control power: 0.01~400W; Static current: 0.02 A (standby) PWM duty ratio:10%~100%; PWM frequency: 13 KHz
- Package include: 1 x 200 RPM DC Motor, 1 x 10A PWM
SKU: n/a
There are no reviews yet.