- Model No: NSE 08-01
- Type of Product: Flow Control Valve
- Thread Size: 1/8 Inch
- Tube (ID) mm: 08
- Weight: 18g
- Color: Blue & black
Motors | Drivers | Pumps | Actuators
PU CONNECTOR NSE 08-01 (8mm OD X 1/8″ BSPT Flow Control Valve)
- Model No: NSE 08-01
- Type of Product: Flow Control Valve
- Thread Size: 1/8 Inch
- Tube (ID) mm: 08
- Weight: 18g
- Color: Blue & black
₹409.00 ₹609.00
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “PU CONNECTOR NSE 08-01 (8mm OD X 1/8″ BSPT Flow Control Valve)” Cancel reply
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
-20%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
0 out of 5(0)- Rated voltage: DC3V or 4.5V, Tube size: 6mm ID x 8mm OD
- Load rated current: 0.18A, Use: diving type
- Package Included: 4x Water Pump
- Only suitable for experiments, not recommended for continuous use, if the product has any problem, please contact Gikfun customer service, we will help you to solve the problem.
- No load of water discharge capacity: 100L / H
SKU: n/a -
Drone Motor, Motors | Drivers | Pumps | Actuators
AEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
-40%Drone Motor, Motors | Drivers | Pumps | ActuatorsAEROKART INDIA N20 3.7V – 6V 100 RPM Micro Gear Reduction DC Motor Toys – metal gearbox – ideal for making robots (2 N20 Motor)
0 out of 5(0)- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
- DC 6V, Speed: 100RPM, Current: 30-40MA
- Mini metal gearwheel gear motor with excellent stall characteristics, it can climb hills easily. You can also easily mount a wheel on the output shaft of motor.
- Rated Voltage:DC 6V/ 12V.
- This is a DC Mini Metal Gear Motor, ideal for making robots wheels Diy Toys, Lightweight, high torque and low RPM
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
0 out of 5(0)The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Motors | Drivers | Pumps | Actuators
100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
-51%Motors | Drivers | Pumps | Actuators100RPM DC 3-12V L-Shape BO Gear Motor One side Shaft For Arduino Smart Car
0 out of 5(0)The 100RPM Single Shaft L- Shaped BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a
There are no reviews yet.