- Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted.
- Only SPI support.
- Broken down into 256.
- Combines maximum efficiency and best motor torque for noiseless operation.
Motors | Drivers | Pumps | Actuators
TMC2130 V1.1 Stepper Motor Driver Module
- Two-phase stepper motor single-phase current 1.2A (peak 2.5A) motor current can be adjusted.
- Only SPI support.
- Broken down into 256.
- Combines maximum efficiency and best motor torque for noiseless operation.
₹823.00 ₹1,423.00
Based on 0 reviews
0.0 overall
0
0
0
0
0
Be the first to review “TMC2130 V1.1 Stepper Motor Driver Module” Cancel reply
Related products
-
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
-20%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 4 Pieces DC 3V-5V Micro Submersible Mini Water Pump
0 out of 5(0)- Rated voltage: DC3V or 4.5V, Tube size: 6mm ID x 8mm OD
- Load rated current: 0.18A, Use: diving type
- Package Included: 4x Water Pump
- Only suitable for experiments, not recommended for continuous use, if the product has any problem, please contact Gikfun customer service, we will help you to solve the problem.
- No load of water discharge capacity: 100L / H
SKU: n/a -
Motors | Drivers | Pumps | Actuators
TOWER PRO 9G MICRO SERVO MOTOR
0 out of 5(0)The Micro Servo 9G is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck useFeatures:- Required Pulse: 3-5 Volt Peak to Peak Square Wave
- Operating Voltage: 4.8-6.0 Volts
- Operating Temperature Range: -10 to +60 Degree C
- Operating Speed (4.8V): 0.12sec/60 degrees at no load
- Operating Speed (6.0V): 0.10sec/60 degrees at no load
- Stall Torque (4.8V): 1.8kg/cm
- Stall Torque (6.0V): 2.4kg/cm
- 360 Modifiable: Yes
- Bearing Type: Ball Bearing
- Gear Type: Nylon Gears
- Connector Wire Length: 12″
- Dimensions: 22×11.5x27mm
- Weight: 11g
Package Content:
1 x TOWER PRO SG90 9G MICRO SERVO MOTOR
SKU: n/a -
Motors | Drivers | Pumps | Actuators
AEROKART INDIA 3pcs Mini Water Pump DC 3V 5V Micro Submersible Motor Pump + 3M Clear Vinyl Tubing Flexible PVC Tubing for Fish Tank Fountain Aquarium Garden Plant Flower
-17%Motors | Drivers | Pumps | ActuatorsAEROKART INDIA 3pcs Mini Water Pump DC 3V 5V Micro Submersible Motor Pump + 3M Clear Vinyl Tubing Flexible PVC Tubing for Fish Tank Fountain Aquarium Garden Plant Flower
0 out of 5(0)- 【Application】Our mini water pump and vinyl tubing set, which is great for fish tank, aquarium, plant watering etc.
- 【Long Working Time】Our mini Pump continuous service life of up to more than 300 hours.
- 【Big Flow Rate 】It looks small in shape, its big flow rate that can be 100L/H.
- 【Mini Water Pump】Voltage: DC 3V-5V; Style: Horizontal; Current: 100-200mA
- 【3M Vinyl Tubing】Length: 3M; Inside Diameter=0.22″/5.54mm; Outside Diameter=0.32″/8.20mm; Smooth inner surface for easy flow and easy cleaning.
SKU: n/a -
Motors | Drivers | Pumps | Actuators
200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
-27%Motors | Drivers | Pumps | Actuators200RPM DC 3-12V Dual Shaft BO Gear Motor For Arduino Smart Car
0 out of 5(0)The 200 RPM Dual Shaft BO Motor motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-6V and is perfect for building small and medium robots.
A small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & lightweight makes it suitable for in-circuit placement. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car.
FEATURES :
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- Elimination of machining operations.
- Corrosion-resistance; elimination of plating, or protective coatings.
- Low density: lightweight, low inertia.
- Consistency with the trend to greater use of plastic housings and other components.
- Capability to absorb shock and vibration as a result of elastic compliance.
- The relatively low coefficient of friction.
- Uniformity of parts.
- used with a 69mm Diameter Wheel for Plastic Gear Motors.
SKU: n/a
There are no reviews yet.